By Rohit••9 min read•Article

Chess Tiebreaks Explained: Buchholz and Beyond

How chess tiebreaks work under FIDE's 2026 rules: Buchholz, Cut-1, Sonneborn-Berger, direct encounter and ratings, with a worked example of two tied players.

CheckmateX Team
Chess training & strategy experts • About us
A black king stands on a grey chessboard

The Short Answer

Quick answer: When players finish on the same score, the tournament rules decide. They can share the place, play a play-off, or use an ordered list of tiebreaks. The common ones are Buchholz (your opponents' total score), Buchholz Cut-1 (the same, minus your weakest opponent), Sonneborn-Berger (credit for beating strong finishers), direct encounter and number of wins. If the whole list still ties, FIDE says to draw lots.

I read FIDE's Play-off and Tie-Break Regulations, applied from 1 March 2026, and worked through an example with two tied players.

Share, Play Off or Break the Tie

FIDE's tie-break regulations start with a choice the organizer makes. Each tournament's rules should say whether tied players share the place. If they don't share, the rules must say how to rank them.

There are two ways:

  1. A play-off. Tied players play extra games over the board. The rules set the format, time limit and schedule.
  2. Tiebreaks. The ranking comes from numbers worked out from the results, with no extra games.

If the rules say nothing, FIDE's default is tiebreaks.

How the Tiebreak List Works

Tiebreaks come as an ordered list. The chief organizer picks them, and the chief arbiter can add more. The full list has to be published before the tournament starts.

At the end, tied players are ranked by the first tiebreak. Anyone still tied moves on to the second, then the third, and so on.

If the list runs out and players are still level, the tie is broken by drawing lots, unless the rules say such ties stay unbroken.

So the order matters as much as the tiebreaks themselves. The same results can give a different ranking under a different list.

The Four Kinds of Tiebreak

FIDE sorts tiebreaks into four types by what they're based on.

TypeBased on
AOnly the games between the tied players
BYour own results, known as you play
CYour opponents' final results, known only at the end
DYour opponents' known data, such as ratings

Type B is the one you control directly. Type C depends on how your opponents do after they've played you, so it can change right up to the last game of the event.

A tiebreak list can mix all four types. Buchholz, the next one here, is Type C.

Buchholz

Buchholz is a common first tiebreak in Swiss events, Titled Tuesday included. FIDE defines it simply: the sum of the scores of each of your opponents.

The idea is that a player who faced tougher opposition, measured by how those opponents finished, deserves the higher place.

It's a Type C tiebreak, so it's only final once the last round ends. Your Buchholz can rise or fall in the last round even if your own game is over, since your earlier opponents are still playing.

That makes it fair over a whole event, but hard to predict before the end.

Cut-1 and Median Versions

Plain Buchholz has a weakness. One very weak opponent can drag your total down. FIDE's rules offer modifiers that cut the extremes:

ModifierWhat it removes
Cut-1Your opponent with the lowest score
Cut-2The two lowest
Median-1The lowest and the highest
Median-2The two lowest and the two highest

FIDE calls Cut-1 the most used modifier. It also applies to other tiebreaks, such as Sonneborn-Berger and average rating.

Buchholz Cut-1 is the version Chess.com uses in Titled Tuesday.

Sonneborn-Berger

Sonneborn-Berger rewards results against strong finishers. For each round, you multiply your opponent's final score by the points you scored against them, then add it all up.

In practice:

  1. Beat an opponent and you add their whole final score.
  2. Draw and you add half their score.
  3. Lose and you add nothing.

So two players on the same total can have very different Sonneborn-Berger scores. Beating the event's top scorer counts far more than beating the bottom one.

Lichess uses it in its Swiss events, as our Arena vs Swiss guide explains.

Direct Encounter

Direct encounter looks only at the games between the tied players. If they met, the sum of their scores in those games makes a separate mini table.

When all the tied players met each other, that mini table decides their ranks. In a Swiss, not everyone meets. FIDE still ranks a player first if they'd stay alone on top of the mini table whatever the missing games' results were.

Two details matter. Forfeits are left out unless the event rules say otherwise. And if two players met more than once, the average of their games is used.

Tiebreaks Based on Your Own Results

Type B tiebreaks look only at your own record, so you can track them as you play.

TiebreakWhat it counts
Number of WinsRounds where you got a win's points, played or not
Games WonWins over the board only
Games with BlackGames played over the board with Black
Wins with BlackWins over the board with Black
Progressive ScoreYour running score, added up after each round

Progressive Score rewards a fast start. Two players on 4 points differ if one won early and the other won late.

Rating Based Tiebreaks

Some tiebreaks use ratings rather than results.

  1. Average Rating of Opponents (ARO). The average rating of the opponents you played over the board.
  2. Tournament Performance Rating (TPR). ARO plus a rating difference based on your score, from FIDE's rating tables.

FIDE adds a rule here. These tiebreaks must be dropped when unrated players are in the event, unless the tournament rules say how to handle them.

Our guide to getting a FIDE rating explains how an unrated player earns a first rating.

A Worked Example

Two players finish tied on 4 out of 5, behind a winner on 4.5. Player A won four games and lost to the winner, while B won three and drew two.

A's opponents finished on 3, 2.5, 4.5, 1 and 3. B faced opponents who finished on 3.5, 3, 2, 3 and 2.5, with the two draws against the 3.5 and the first 3.

TiebreakPlayer APlayer BRanks higher
Buchholz1414Still tied
Buchholz Cut-11312A
Sonneborn-Berger9.510.75B
Number of Wins43A

I checked each sum by hand against FIDE's definitions.

Why the Order Decides Who Ranks Higher

In the example, which player takes second place depends on which tiebreak comes first.

  1. Buchholz Cut-1 first: Player A finishes second.
  2. Sonneborn-Berger first: Player B finishes second.
  3. Plain Buchholz first: the tie moves on to the next tiebreak.

Neither player did anything wrong. They just took different paths to 4 points.

That's why FIDE requires the list to be published before the event. Read it when you enter, so the final standings don't surprise you.

Byes and Forfeits

Unplayed games would twist Buchholz and Sonneborn-Berger if they counted like normal results. FIDE gives them a full article for Swiss events.

For your opponents' tiebreaks, most unplayed rounds count with the points actually given. A requested bye in the last round, or one followed only by unplayed rounds, counts as a draw instead.

For your own tiebreak, each unplayed round is scored as a game against a dummy opponent, with limits on the dummy's score.

The aim is fairness. A player who skips the last round shouldn't sink the tiebreaks of their earlier opponents.

What Changed in 2026

The current rules were approved by the FIDE Council on 2 February 2026 and apply from 1 March 2026. They replaced the version in use from 1 August 2024.

I compared the two lists of tiebreaks. The 2026 version adds three:

  1. Standard Points. Rounds where you outscored your opponent, plus half the rounds where you scored the same.
  2. Tournament Pairing Number. Players sorted by their starting number.
  3. Rating. Players sorted by their own rating, highest first.

The last two can also be used in reverse order.

Tiebreaks in Online Events

Online events choose their own tiebreaks too.

EventTiebreak
Chess.com Titled TuesdayBuchholz Cut 1
Lichess SwissSonneborn-Berger
Lichess ArenaTournament performance

The same logic carries over from the board. If you know the tiebreak before the last round, you know whether a quick draw or a fight for a win is the better choice.

In a Swiss with Sonneborn-Berger, a draw against a strong finisher still adds half their score. With Buchholz, your own result doesn't change your total directly.

Before Your Next Tournament

A few habits help when ties are likely.

  1. Read the tiebreak list. It must be published before the event starts.
  2. Play for wins when you can. Wins help Number of Wins and Sonneborn-Berger, and a draw only counts half.
  3. Expect Buchholz to move. Your earlier opponents' results keep changing it until the last game ends.
  4. Take byes with care. A requested bye changes how that round counts.

Our guide to your first chess tournament covers the rest. For practice, play full games against a bot at your level.

Frequently Asked Questions

What is Buchholz in chess?

Buchholz is a tiebreak that adds up the final scores of all your opponents. A higher total means you faced opponents who did better, so you rank above a tied player with a lower total.

What does Buchholz Cut-1 mean?

It's Buchholz with your lowest scoring opponent left out. FIDE calls Cut-1 the most used modifier, and it stops one very weak or absent opponent from dragging your total down.

How is Sonneborn-Berger calculated?

Add the full final score of every opponent you beat and half the final score of every opponent you drew. Losses add nothing, and the higher total ranks first.

What happens if all the tiebreaks are equal?

FIDE's rules say any tie left after the whole list is broken by drawing lots, unless the tournament rules say those ties stay unbroken and the players share the place.

What is tournament performance rating?

It's the average rating of your opponents plus a rating difference based on your score, using FIDE's tables. Our Elo rating explainer covers the rating system behind it.

Ready to Improve Your Chess?

Train openings, solve puzzles, play online, and climb the leaderboard with CheckmateX.

Get CheckmateX Free